If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
HUBBARDTONFORGE.COM
-, -
154 RT. 30 SOUTH
•
CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge
®
. All rights reserved.
27819 C
Installation Instructions
To Mount Fixture to Wall (Figure 1)
(Continued)
4. Thread the black # 8 screws (E) up through the holes in the
top of the wall mount bracket (B). Leave the bottom screws
out for now.
5. Hold the xture assembly (A) close to the wall mount
bracket and using suitable wire connectors (not provided),
connect xture wires to supply wires (white to white or
ribbed and black to black or smooth, and bare copper or
green to bare copper or green). Ground the mounting
bracket using the green ground screw (F) and cupped
washer (G) to secure a pigtail lead to the bracket.
6. Carefully tuck all wires behind the xture assembly and
inside the wall mount bracket and place the xture over
the bracket so that the screws in the top of the wall bracket
go through the holes in the top of the xture. Secure the
xture by threading the remaining black #8 screws
up through the holes in the bottom of the xture and into
the mounting bracket.
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRES ARE EXPOSED.
To Install Double Glass Option (Figure 2)
Component Parts
A Fixture Assembly
H Ring
I Glass
J Bulb (Included)
1. Install light bulb (J). Be careful not to touch bulb with bare
hands; oil from the hands will dramatically reduce bulb life.
Note: The bulb included is based on our design preference; see
the xture wattage sticker for Max wattage information.
2. Carefully lower the ring (H) around the inner tube of the
glass (I) until it rests on the bottom.
3. Install glass (I) by rotating it clockwise while holding the
xture assembly (A) until it rests against the xture. Do not
over tighten.
4. Restore electricity at main breaker.
B273
Sconce 207790
Page 2 of 3
H
A
(Figure 2)
I
J
(2 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji