Hubbardton-forge 207790 Instrukcja Użytkownika Pobierz pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

27819 C

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

For fixtures requiring assembly, please refer to assembly instructions

before installation.

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. If installing in a non-

wood frame application, we recommend consulting a qualified builder

or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Fixture Assembly

B Wall Mount Bracket

C Anchors

D #10 Screws

E #8 Black Screws

F Green Ground Screw

G Cupped Washer

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Center the wall mount bracket (B) over the electrical box

being sure to hold it plum and level. With a pencil, mark

the location of all mounting holes in the wall mount bracket

on the wall behind.

Important: Wall mount bracket must be secured to a solidly

mounted electrical box and/or a framing member in at least two

locations. Do not depend on drywall anchors alone to support this

xture. If in doubt, contact a qualied electrician.

Put the wall mount bracket down and drill 1/4" holes in the

locations marked on the wall. For holes using anchors, place

the tapered end of the anchors (C) into the holes and gently

tap them ush to the wall using a light weight hammer.

3. Thread the wires in the electrical box through the center hole

in the wall mount bracket while moving the bracket into

position. Using the #10 screws (D), screw the bracket

securely to the wall. Be careful not to over-tighten or

strip the anchors.

B273

Sconce 207790

Page 1 of 3

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

(Figure 1)

(Continued)

1 2 3

Installation Instructions 1

Podsumowanie treści

Strona 1 - Installation Instructions

Strona 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Strona 3

Komentarze do niniejszej Instrukcji

Brak uwag

Hubbardton-forge 207790 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Oświetlenie Hubbardton-forge 207790. Hubbardton Forge 207790 User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oświetlenie Hubbardton-forge 207790